Flang shut off Valve, Outlet Flare Jointed 1/2" SAE.with in Access Valve Flare 1/4" SAE.

Check Valve inlet -outlet Connecting =1/2" Male SAE Flare. made from hot pressed brass with Teflon (PTFE) valve seat Stainless steel spring"

"Check Valve inlet -outlet Connecting =3/8"" ODS. Solder.made from hot pressed brass with Teflon (PTFE) valve seat Stainless steel spring"

RECEIVER VALVES inlet Connecting =3/8" Male NPT. -outlet Connecting =3/8" Male SAE.FLARE made from hot pressed brass with Teflon (PTFE) valve seat"

Flang shut off Valve, Outlet Flare Jointed 1-1/8"ODS. Solder ,with in Access Valve Flare 1/4"SAE.

"RECEIVER VALVES inlet Connecting =1/2" Male NPT. -outlet Connecting =1/2" Male SAE.FLARE made from hot pressed brass with Teflon (PTFE) valve seat"

Connections 7/8”ODS.(1-1/8" ODM) ,Ts= -35 to +150 C ,Ps=45 bar ,Kv=7.1 m3/h

solenoid valve 1/2"SAE Diaphragm, specifically used with HCFC ,HFC,HFO,water,compressed air,gas,oil,

HF2 Type คอยล์ไฟฟ้าCoil Type HF2 Voltage [V] 220/230 Frequency [Hz] 50/60 Power [W] 8.สำหรับโซลินอยด์วาล์ว CASTEL แบบสวมเร็ว

RECEIVER VALVES inlet Connecting = 1/2" Male NPT. - outlet Connecting = 5/8" Male SAE. FLARE made from hot pressed brass with Teflon (PTFE) valve seat"

The gauge mounting valves,which use the following refrigerant fluids: R22 , R134a, R404A, R407C, R410A; R507 proper to the Group II (as defined in Article 9, Section 2.2 of Directive 97/23/EC and referred to in Directive 67/548/EEC). Connections SAE. Flare 1/4" inlet and NPT.1/8" to gauge, Depth installing 17 mm. ,,Ts= -60 to +130 C ,Ps=45 bar ,that have to a little flange for fixing the valve to the control panel - a SAE-Flare connection for joining it to the copper tube - an NPT (type 8320) or a swivel SAE Flare (8321) connection for mounting the gauge"