Check Valve inlet -outlet Connecting =1/2" Male SAE Flare. made from hot pressed brass with Teflon (PTFE) valve seat Stainless steel spring"

Connections 7/8”ODS.(1-1/8" ODM) ,Ts= -35 to +150 C ,Ps=45 bar ,Kv=7.1 m3/h

วาล์วเปิด-ปิดด้วยมือหมุน / Stop valves by diaphragm Diaphragm Valve 5/8"Flare inlet and outlet. Valve use with the following ASHRAE 34:2019 refrigerants, Class A1: HCFC (R22) HFC (R134a, R404A, R407C, R410A, R507) HFO (R1234ze) HFO + HFC (R448A, R449A, R450A, R452A, R513A, R515A, R515B) Connections SAE Flare 5/8" Kv [m³/h] 1,80 PS [bar] 28 TS [°C] min.-35 TS [°C] max. +90

Safety devices 1/4" NPT x 3/8" SAE Model 3060/23

Safety devices 3/8" NPT x 1/2" SAE Model 3060/34

"Check Valve inlet -outlet Connecting =1-3/4""Female SAE Flare. made from hot pressed brass with Teflon (PTFE) valve seat Stainless steel spring"

Connections 1-5/8” ODS.(2"ODM) ,Ts= -35 to +150 C ,Ps=45 bar ,Kv=25.0 m3/h

Check Valve inlet -outlet Connecting =3/8" Male SAE Flare. made from hot pressed brass with Teflon (PTFE) valve seat Stainless steel spring"

The gauge mounting valves,which use the following refrigerant fluids: R22 , R134a, R404A, R407C, R410A; R507 proper to the Group II (as defined in Article 9, Section 2.2 of Directive 97/23/EC and referred to in Directive 67/548/EEC). Connections SAE. Flare 1/4" inlet and NPT.1/8" to gauge, Depth installing 17 mm. ,,Ts= -60 to +130 C ,Ps=45 bar ,that have to a little flange for fixing the valve to the control panel - a SAE-Flare connection for joining it to the copper tube - an NPT (type 8320) or a swivel SAE Flare (8321) connection for mounting the gauge"

RECEIVER VALVES inlet Connecting = 1/4" Male NPT. - outlet Connecting = 1/4" Male SAE.FLARE made from hot pressed brass with Teflon (PTFE) valve seat"